1-Port USB Print Server Hardware User’s Guide Rev. 01 (July, 2002) Made In Taiwan RECYCLABLE
- 10 - 2 2 INSTALLATION This chapter explains how to install your print server and connect it to the network. It also describes the automatic power
- 11 - 7. Connect the DC end of the AC Power adapter to the DC power input socket of the print server and the AC end to the wall outlet. This
- 12 - USB LED Pattern Error Type Flash slowly Firmware reload required Steady on DRAM error 1 long - 2 short Timer INT error 1 long - 3 short Fl
- 13 - A 3 PRODUCT SPECIFICATIONS Printer Connection Printer Interface: One USB port, compliant with USB 1.1 standard Network Connection Network Inte
- 14 - Operating System Support Windows 95/98/Me, Windows NT/2000/XP; NetWare 5.x (NDPS LPR remote printing); HP-UX UNIX, Sun OS, Solaris, SCO UNIX,
- 2 - TABLE OF CONTENTS ABOUT THIS GUIDE...3 INTRODUC
- 3 - 0 ABOUT THIS GUIDE This manual describes the 1-Port USB Print Server, including full descriptions of its features, detailed installation proced
- 4 - 1 1 INTRODUCTION Congratulations on purchasing your 1-Port USB Print Server, the easiest and fastest way to deploy printers on your network. Thi
- 5 - General Features ♦ Compact pocket size ♦ Compliant with USB 1.1 ♦ Equipped one 10Base-T/100BASE-TX LAN port ♦ Multi protocol support is ide
- 6 - to your file servers through the network, the printer can be stationed at the location of maximum convenience to users. This 1-Port USB Print Se
- 7 - External Features This section describes the external features of your 1-Port USB Print Server. Front View Front Panel There are three gree
- 8 - Rear View Rear Panel Component Description DC Power Input The DC power input connector is located on the Print Server’s rear panel and is l
- 9 - ♦ Default IP address – 192.168.0.1 ♦ Subnet Mask – 255.255.255.0 Please note that the PC’s IP address must correspond with the print server’s
Commentaires sur ces manuels