Airlinkplus APSUSB201W Manuel d'utilisateur

Model # APSUSB201W User’s Manual Ver. 1A

2 HARDWARE INSTALLATION Networking Application The following diagram explains the application of your print server. Wireless USB Print Server- 1

Installing the Print Server Warning: Only a USB printer may be connected to the USB port of the print server. Connecting any other USB device to the

3 USING THE UTILITIES This chapter describes the software utilities for the print server, including how to set up your print server with these ut

• User's Guide – click to preview the User's Guide in PDF format for detailed information of the Wireless Print Server. • Install Utility

PS-Utility To avoid the conflict in your network, you can use PS-Utility to change the related settings of your print server (such as the IP address)

3. The InstallShield Wizard starts to install the software, and the Progress bar indicates the installation is proceeding. 4. When completed, click

2. The main screen will appear as below, and it starts to search the connected print server within the network. Your print server Component Features

- Update Firmware: Click this button to update the firmware of the selected print server. - Show Web Setup: Click this button to open your web brow

PS Wizard PS Wizard is a convenient utility that allows you to set up the print server’s port connection. To launch PS Wizard: 1. Insert the Installa

2. In the following window, select one printer in the Printer List to set up port connection, and then click Next >. Choose one connected printe

TABLE OF CONTENTS ABOUT THIS GUIDE...4 INTRODUCTION...

4. The configuration is complete. Click Reboot or Finish. After rebooting, PS Wizard will help you to complete the port connection automatically.

4 PRINTING IN MAC OS Rendezvous Uses in MAC OS 10.2 The latest version of MAC OS provides a new feature that is called Rendezvous. Rendezvous is a

1. Launch Print Center. Press and hold the Option key, click the Add button. 2. Select Rendezvous from the pop-up menu. 3. When click

4. Select the desired printer, and the following pop-up menu displays the printer’s manufacturer. Select Generic. 5. The printer is ins

Setting Up Apple Talk/LPR Printing For MAC OS X User With MAC OS X, you can use AppleTalk or LPR printers to print through the print server. Follow

3. To print, open a document and select File > Print from the menu. Select this option.4. Select Edit Printer List from the Printer dialo

- AppleTalk: After selecting AppleTalk, the Port Name of the print server will be displayed. Select the Port to which the post-script printer is con

For MAC OS 9 User If you use MAC OS 9, you can use the AppleTalk network protocol for network communications over standard Ethernet or Fast Ethernet

To print from MAC OS Client Workstations: The actual settings of selecting a PostScript printer connected to your print server may be different from t

4. If you have not previously set this printer as the default, your computer will prompt you for a PostScript Printer Description file. Choose Sel

Management J User ... 36 CONFIGURATION...

5 WEB CONFIGURATION You can access and manage the Wireless Print Server through: 1) the enclosed software PS-Utility, and 2) a web browser. This c

Management The Management Screen of the Configuration Utility - 31 -

The Management screen displays the basic information of the print server, including the following four categories: z System z Wireless z Network z

Management J Wireless Click the Wireless item in the left column to display the information of the wireless LAN. Clicking Refresh will update the

Management J Network Click the Network item to display the information of the LAN. Clicking Refresh will update the information. - 34 -

Auto IP This field contains the current settings of TCP/IP, including DHCP/BOOTP, UPnP, and MAC Rendezvous. The items in this field are configured i

Management J User Click the User item in the left column to display the user(s) information. Users Printing Log The items in this field display the u

Configuration Configuration J System System Device In this field, you can configure the basic information of your print server. - Server Name: Assi

Port Settings In this field, you can assign the Port Name for the print server, and the description for the USB port. It also allows you to select

Configuration J Wireless Wireless Interface - Connection Mode: Select one of the two connection modes. • Infrastructure (default) - Connects to a

ABOUT THIS GUIDE This manual provides instructions and illustrations on how to use your Wireless USB Print Server, including: z Chapter 1, Introdu

connection. In addition, if WEP is enabled, all clients and Print Server must use the identical WEP key and key number. - SSID: Assign the SSID in th

- Authentication Type: You can set the authentication type by selecting the settings: Open System, Shared Key, and Both. TIP: Once you have changed

- IP Address: This option allows you to set the IP address manually or automatically. When you choose Manually Assign, you should enter the relate

Configuration J User Printing Control By configuring the Enable User Printing Control option (Yes or No), the user in the User List is permitted to

Configuration J E-mail E-mail Account You can assign an E-mail address to the print server, so that your mail of the account can be printed out direc

E-mail Notification You can set the print server to send a message when the printer status changes through E-mail. To enable this function, set the

Configuration J SNMP SNMP Management SNMP (Simple Network Management Protocol) is a set of protocols for managing complex networks - Community 1/2/3

Tools Tool J Print Test Print Test Click Test to print a test page. - 47 -

Tool J E-mail Test E-mail Account Click Test to send a test E-mail to the given administrator’s E-mail address. Receive E-mail Click Yes to immediate

Tool J Reset Reset Click Yes to immediately reset the print server. - 49 -

1 INTRODUCTION Congratulations on purchasing your Wireless USB Print Server, the easiest and fastest way to deploy printers on your network. This

Tool J Factory Reset Factory Reset Click Yes to reload the factory settings of the print server. - 50 -

Tool J Firmware Upgrade Firmware Upgrade When a new version of firmware is available (e.g. downloading from the manufacturer’s website), you can upg

Tool J Backup Backup Device Configuration to File Click Backup to backup your current configuration of the print server to file and then save in the

Help This screen displays the information of the print server. - 53 -

6 PRODUCT SPECIFICATIONS Printer Connection Printer Interface: One USB port, compliant with USB 2.0 Hi-speed standard. Network Connection Wireless

Network Protocol Support Transport Protocols: TCP/IP, SMB, NetBEUI, and AppleTalk. TCP/IP Protocols Support: BOOTP, SNMP, Telnet, FTP, LPD, DHCP, and

LEDs Power, USB, LAN, WLAN. Environmental and Physical Power Supply: 5VDC. Operating Temperature: 0°C to 50°C. Storage Temperature: -25°C to 55°C. Hu

APPENDIX Technical Support E-mail: [email protected] Toll Free: 1-888-746-3238 Web Site: www.airlinkplus.com - 57 -

Package Contents Unpack the package and check all the items carefully, and be certain that you have: ♦ One Wireless USB Print Server. ♦ One AC Power

General Features ♦ Compact pocket size. ♦ Compliant with USB 2.0 high-speed printing. ♦ Equipped with one 10/100 Fast Ethernet LAN port. ♦ Fast 5

Product View This section describes the externally visible features of the print server. LEDs*AntennaUSB Port – connect the print

* There are four green LED indicators on the front panel: LEDs Description Power Steady light confirms that the Print Server is powered on. USB When