Airlinkplus APSUSB201W Guide d'installation télécharger pdf (Page 12)

Section 7

Configuring Wireless Printing

The following section describes how to setup the print server for wireless printing. It is strongly

recommended that you test the print server with a wired connection first before moving on to configure

wireless printing.

Step 1 Open the web browser and type in the IP address of your print server. (Default is 192.168.1.254)

Step 2 Vefiry the Printer Status is Online.

Step 3 Click on Configuration and then Wireless.

Note: You should use a wired connection to configure the following wireless settings before unplugging

the network cable from the print server.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Pas de commentaire

Airlinkplus APSUSB201W Guide d'installation Page 12